FORD 7.3L/6.0L POWER STROKE HEUI TEST TOOL - MADE IN THE USA!
THIS TOOL IS CUSTOM MADE IN THE USA!!!
- Ford Power Stroke 6.0L & 7.3L engines. From 1994-2007
- Cat 3126B, 3126E, and C7 engines. From 1997-2006
- International VT365 & T444E engines. From 1994-2007
Monitor system performance with the analog gauge or perform an air leak test with the same tool!
You do not need to remove the IPR* valve to perform a system air leak test! No adapters needed to screw in place of the IPR! No fancy diagnostic scan tools needed!
For an air leak test, simply supply shop air pressure through the ICP** sensor port or available plugged oil rail port, and connect 12v to the IPR .
Tool comes with directions as well.
*- Injection Pressure Relief
** - Injection Control Pressure
- 6,000 psi liquid filled Gauge
- 5,800 psi hydraulic hose
- 23,200 psi minimum burst pressure rating
**⚠California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.