The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

FASS FUEL SYSTEM TITANIUM SERIES  REPLACEMENT FUEL FILTER (PF-3001) & WATER SEPARATOR (XWS-3002)

FASS FUEL SYSTEM TITANIUM SERIES REPLACEMENT FUEL FILTER (PF-3001) & WATER SEPARATOR (XWS-3002)

No reviews yet Write a Review
$57.90
SKU:
XWS3002-PF3001
Condition:
New

FASS FUEL SYSTEM TITANIUM SERIES  REPLACEMENT FUEL FILTER (PF-3001) & WATER SEPARATOR (XWS-3002)

New Filter Information
The following FASS filters FF-3003, FS-1001, FF-3010, and FS-1020 have been discontinued and are no longer available.
These filters are being replaced by PF-3001 and XWS-3002.
 
XWS-3002 – This new more efficient Extreme Water Separator is rated @ 2 microns absolute. The reason the water separator no longer has a drain is because the filter element itself traps the water.
 
PF-3001 – The new Particulate Filter is rated @ 144 microns. The 144 Micron Particulate Filter on the suction side will drastically reduce cavitation, increase flow properties, lower the sound output of the FASS System, and removes larger fuel particulates.
 
Important: The new XWS-3002 MUST be used in conjunction with the PF-3001, the new filters cannot be used in combination with the FF-3003/FF-3010 or
FS-1001/FS-1020.
 
When replacing the discontinued filters with the new XWS-3002 and PF-3001, the XWS-3002 will now be placed on the pressure side of the pump and the PF-3001 will be placed on the suction side. PLEASE SEE THE LOCATION DIAGRAM ON THE NEW FILTERS FOR PROPER FILTER PLACEMENT!

**NOTE: FWS-3003, FF-3003, FF3010, and FS-1001 have been superseded by FASS to these new numbers and will be shipping with this kit.  They have much better ratings and are the same size.  But, do not have the water drains.  The old part number is no longer available.