SENSORS

2003-2010 FORD 6.0L/6.4L POWERSTROKE DIESEL ENGINE EXHAUST MANIFOLD EGR TUBE CONNECTOR OEM 3C3-9F485-BA     **California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to...

2003-2010 FORD 6.0L 6.4L POWER STROKE INTERNATIONAL/NAVISTAR DT466 VT365 ENGINE COOLANT/OIL TEMPERATURE SENSOR   Interchange Part Numbers Ford: 3C3Z10884AA 3C3Z-10884-AA   Navistar:...

A defective thermostat can result in engine overheating and potential internal damage. Improve the reliability of your 6.0L cooling system with a Mishimoto Ford 6.0L Powerstroke High-Temperature Thermostat and cast aluminum housing! This thermostat is...

2003-2007 FORD 6.0L POWER STROKE DIESEL FICM RELAY FUEL INJECTION CONTROL MODULE F80B-14B192-AA NEW OEM FORD RELAY!!! FORD F80B-14B192-AA, 12V, 70A, G1UHQ   FICM relays are often over looked but provide the critical transfer of...

2003-2010 FORD 6.0L/6.4L POWER STROKE DIESEL CAMSHAFT POSITION SENSOR NEW OEM 8C3Z-12KO73-A   Fit for the following: 2005-2010 Ford E-150 2005-2010 Ford E-250 2004-2010 Ford E-350/E-350 Super Duty 2004-2010 Ford E-450 Super...

2003-2007 FORD 6.0L POWER STROKE IPR VALVE SCREEN SEAL KIT - FORD OEM #3C3Z9H529A   Included: 1 - Backup ring 1 - Orifice o-ring 1 - O-ring seal 1 - IPR valve screen Instructions   This kit will fit 2003-2007 Ford 6.0L Super...

1994-2010 FORD 7.3L / 6.0L POWER STROKE ICP/EBP SENSOR CONNECTOR PIGTAIL   Ford Diesel ICP & EBP Sensor Connector Harness is constructed from durable plastic to prevent oil from soaking into the sensor, protecting it from damage. The sensor...

1994-2010 FORD 7.3L 6.0L 6.7L TURBO VGT SOLENOID, IPR & INJECTOR PIGTAIL    6" LONG 20 GAUGE WIRE WITH SEALING GROMMET    FITS ALL: 6.0L 7.3L IPR VALVES 7.3L INJECTORS 6.0L 6.7L VGT SOLENOIDS   **⚠California...

2005-2007 FORD POWERSTROKE 6.0L EXHAUST BACK PRESSURE (EBP) SENSOR TUBE Tube Specifications: Replaces part numbers including: 5C3Z-9D477-A,5C3Z9D477A Bolts between exhaust manifold and EGR Valve Built to strict quality control standards Helps...

2003-2010 FORD 6.0L/6.4L POWERSTROKE CRANKSHAFT POSITION SENSOR OEM MOTORCRAFT 3C3Z-6C315-AA   Fit for the following: 2005-2010 Ford E-150 2005-2010 Ford E-250 2004-2010 Ford E-350/E-350 Super Duty 2004-2010 Ford E-450 Super...

2003-2007 FORD 6.0L POWERSTROKE UPGRADED FUEL BANJO BOLTS 6.4L STYLE   THIS IS A GREAT UPGRADE FROM THE FACTORY BANJO BOLTS - THESE BANJO BOLTS HAVE THE CHECK VALVE REMOVED AND HAVE 2 ADDED HOLES COMPARED TO THE 6.0'S (PKG. OF...

2004.5 - 2010 FORD 6.0L POWERSTROKE EXHAUST BACK PRESSURE (EBP) SENSOR* HIGH QUALITY AFTERMARKET SENSOR!   Fits the following vehicles :  2004.5-2007 F SERIES TRUCKS  2006-2010 E SERIES VANS (BEVELED EDGE ON THREADS) *2005 AND...

2003-2010 FORD 6.0L POWERSTROKE 6.0L 4.5L INTAKE MANIFOLD AIR TEMPERATURE SENSOR (IAT)   INTERCHANGE NUMBERS: DY984 / 3C3Z-12A697-AA 3C3Z12A697AA / AP63462  This IAT Sensor fits the following engines:POWER STROKE ENGINES:Year Range...

2004-2007 FORD 6.0L POWERSTROKE INJECTION CONTROL PRESSURE (ICP) SENSOR GASKET KIT    This seal goes between the valve cover and the high pressure oil rail where the ICP sensor screws in. Valve cover removal is required for replacement. This...

2004-2010 FORD 6.0L POWERSTROKE DIESEL NEW  INJECTION CONTROL PRESSURE (ICP) SENSOR - (IN THE PASSENGER SIDE VALVE COVER)  *When replacing sensor have a 23 mm deep socket and 10” extension to replace easily without removing...