2003-2007 FORD 6.0L POWER STROKE DIESEL COOLANT FILTRATION SYSTEM FILTER KIT
HIGH QUALITY AFTERMARKET 6.0L COOLANT FILTRATION SYSTEM - (INCLUDES 1 SCREW ON FILTER) Keep your engine oil to water cooler system flowing and prevent potential engine damage with BDD’s Ford 6.0L Coolant Filter Kit. Residual powder from engine castings and hoses, and, the anti-freeze breaking down from high exhaust temperature creates a plugging slurry which can cause the the engine’s coolers to plug. The easy-to-install kit is mounted in-line with the engine coolant hoses and comes complete with anodized filter head, spin-on filter, mounting bracket, hoses, clamps, fittings, mounting hardware and a bypass valve for easy change of filter. Change the 1st filter after 500 miles the 2nd & 3rd after 3,000 miles and annually after that!
Coolant Filtration System Filter Kit Includes:
- 1pc Coolant Filtration Block
- 1pc Coolant Filter Bracket
- 1pc Coolant Filter
- 2pc 3/8 - 16 Bolts
- 2pc 3/8 Washers
- 2pc Small Hose Clamps
- 2pc Large Hose Clamps
- 2pc Coolant Lines With Fittings
- 1pc Roll of Teflon Tape
**From the OEM factory, many engine blocks will have sand, from the casting process, still in the cooling channels. If not filtered out, the sand can clog EGR coolers or cause premature wear of water pumps or coolant seals. Our Aftermarket Diesel Coolant Filtration System is a stylish and affordable "insurance" against premature failures from debris in the coolant system.
**⚠California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.