2011 -2016 GM/CHEVROLET 6.6L DURAMAX LML REMAN FUEL INJECTOR 0445117010
Remanufactured
- Assembled in a class 100,000 clean room
- Advanced end-of-line testing for balanced fuel delivery, leakage, and opening characteristics
- New Nozzle Assembly
- Rust Resistant Mil-Spec High Temp Coating
Injector Type: Bosch piezoelectric common-rail injectors
Flow Rate: Approximately 29-33 liters per hour (lph) at 180 MPa (megapascal)
Fuel Pressure: Up to 29,000 psi (2,000 bar)
Actuation Method: Piezoelectric
Control Method: Electronic signals from the Engine Control Module (ECM)
THIS INJECTOR ALSO FITS THE FOLLOWING FAMILY OF VEHICLES:
Chevrolet:
- 2011-2016 Silverado 2500HD 3500HD
GMC:
- 2011-2016 Sierra 2500HD 3500HD
OEM # 0445117010, 0986435410
Install Specs:
Injector hold-down bolts: 22 lb-ft.
Fuel Injector fuel pipe nut: 30 lb-ft.
Fuel Injector fuel pipe bracket bolt: 15 lb-ft.
Core Policy: These injectors include a $100 core deposit for each injector set ordered. This is 100% refundable upon receipt of your old unit(s). Cores must be the exact application that was ordered for full credit. Cores that are physically damaged (cracked, melted, or broken) will not be refunded. There should not be any visible signs of rust, fire damage, water damage, or excessive force on any and all parts. Missing parts, if applicable, will void core refund. Cores must be returned within 30 days of purchase date for full refund. After 30 days, the core will be prorated 25% per month.
**⚠California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.
Visit: www.p65warnings.ca.gov
