2007.5-2017 DODGE 6.7L CUMMINS FUEL INJECTOR CAP BLOCK-OFF TOOL
When the pressure of the common rail is too low to start the engine. One of the possible reasons is a defective diesel fuel injector returning excess fuel back to the tank. To identify the individual defective cylinder. You can remove the diesel fuel injection line from the cylinder, and use this block off tool instead of diesel fuel injection line to seal common rail pipe. If the engine can be started normally, and the common rail pressure return to normal value. It prove that the injector of this cylinder is malfunction. If your scanner cannot perform certain tests. This diesel injector block off tool can also be used for diagnosing engine knocking sounds that could possibly be caused by a single cylinder issue. In some situations, you may need several block off tools to test several injectors at the same time.
- 18mm Diesel Fuel Injector Cap/Block-off Tool;
- Replaces # Miller 9864;
- Material: Wolfram Steel (other than iron), enabling a better strength, impact resistance and leak proof;
- Inner Diameter: M18;
- Thread Interval: 1.5.
- One (1Pc) 18mm Diesel Fuel Injector Cap Block-Off Tool.
**⚠California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.
Visit: www.p65warnings.ca.gov
