2007-2018 6.7L DODGE CUMMINS REMANUFACTURED CAB CHASSIS INJECTOR - COMMON RAIL
RAM Truck: 3500, 4500, 5500 (Mid-Range), Cab & Chassis
*****MUST INPUT CODES INTO SCANNER DEVICE - CODES ARE ATTACHED TO THE INJECTORS!!!
Remanufactured Dodge 6.7L Injectors Feature Complete Replacement of Nozzle and Control valve assembly already installed.
This Remanufactured Common Rail Injector is designed specifically for 2007–2018 Dodge Ram 6.7L Cummins Cab Chassis trucks. Each injector is fully disassembled, cleaned, and rebuilt with new high-quality components to meet or exceed OEM specifications. Precision flow calibration ensures consistent fuel delivery, improved performance, and optimal combustion efficiency. If your diesel engine is experiencing rough idle, poor fuel economy, or white smoke, replacing your injectors can restore factory-level operation and reliability.
What’s Included in the Kit:
1x Remanufactured Common Rail Injector (Cab Chassis specific)
Features and Benefits:
-
Built to OEM standards for 6.7L Cummins Cab Chassis models
-
Professionally remanufactured with new seals, nozzles, and control valves
-
Flow-tested for balanced fuel delivery and efficiency
-
Reduces smoke, misfires, and starting issues
-
Cost-effective alternative to new injectors without sacrificing performance
Truck Compatibility:
-
2007.5–2018 Dodge Ram 3500 Cab Chassis 6.7L Cummins Diesel
-
2007.5–2018 Dodge Ram 4500 Cab Chassis 6.7L Cummins Diesel
-
2007.5–2018 Dodge Ram 5500 Cab Chassis 6.7L Cummins Diesel
Product Summary:
The 2007–2018 6.7L Dodge Cummins Remanufactured Cab Chassis Injector provides the perfect balance of performance and value. Each unit is carefully rebuilt and tested to ensure reliability and smooth engine operation. Ideal for fleet or commercial trucks needing dependable power and fuel control.
Shipping Disclaimer
✔️ We ship via USPS, UPS, and FedEx.
✔️ Carrier selection is based on package size, weight, and destination.
✔️ Expedited shipping options available, call to check freight options
✔️ Orders are processed within 1 business day (Monday–Friday).
✔️ Orders placed on weekends or holidays will be processed on the next business day.
✔️ Tracking information will be provided once the item ships.
✔️ Shipping to PO Boxes, APO/FPO may be limited based on carrier restrictions.
California Proposition 65 Warning:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Injector Type: Bosch common-rail injectors
Flow Rate: Approximately 32-35 liters per hour (lph) at 180 MPa (megapascal)
Fuel Pressure: Up to 30,000 psi (2,050 bar)
Actuation Method: Solenoid
Control Method: Electronic signals from the Engine Control Module (ECM)
Interchange Part Number : 0445120187, 0986435573, R0445120187, R0986435573, 5256034, 4983514, 68210512AA, R8210512AA, R8415373AA
Install Specs:
-Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
-Feed tube: Pre-torque to 11 ft.- lbs. to ensure feed tube is seated & centered.
-Injector hold-down bolts final install: 71 inch-lbs.
-Feed tube final install: 34 ft.-lbs.
-Rocker Arm mounting bolts: 27 ft.-lbs.
-Wire connector nuts final install: torque to 11 inch-pounds or finger tighten. DO NOT OVER TORQUE!
-Feed Line at Feed tube and Fuel Rail Side: Torque at 26 ft.-lbs. (Hold Feed Tube bolt with 24mm while torque)
Core Policy: These injectors include a $50 core deposit for each injector set ordered. This is 100% refundable upon receipt of your old unit(s). Cores must be the exact application that was ordered for full credit. Cores that are physically damaged (cracked, melted, or broken) will not be refunded. There should not be any visible signs of rust, fire damage, water damage, or excessive force on any and all parts. Missing parts, if applicable, will void core refund. Cores must be returned within 30 days of purchase date for full refund. After 30 days, no core refund will be issued.
